View TLP240G_8643938.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 1 photocouplers photorelay TLP240G,TLP240Gf TLP240G,TLP240Gf TLP240G,TLP240Gf TLP240G,TLP240Gf start of commercial production 2013-03 1. 1. 1. 1. applications applications applications applications ? mechanical relay replacements ? security systems ? measuring instruments ? factory automation (fa) ? amusement equipment ? smart meters ? electricity meters 2. 2. 2. 2. general general general general the TLP240G and TLP240Gf photorelay consist of a photo mosfet optically coupled to an infrared light emitting diode. they are housed in a 4-pin dip package. they provide an isolation voltage of 5000 vrms, making them suitable for applications that require reinforced insulation. 3. 3. 3. 3. features features features features (1) normally opened (1-form-a) (2) off-state output terminal voltage: 350 v (min) (3) trigger led current: 3 ma (max) (4) on-state current: 100 ma (max) (5) on-state resistance: 35 ? (max, t < 1 s), 50 ? (max, continuous) (6) isolation voltage: 5000 vrms (min) (7) safety standards ul-approved ul1577 file no. e67349 cul-approved csa component acceptance service no. 5a file no. e67349 vde-approved: option (d4) en60747-5-5 (note) (note) (note) (note) note: when an en60747-5-5 approved type is needed, please designate the option (d4) option (d4) option (d4) option (d4) . 4. 4. 4. 4. mechanical parameters mechanical parameters mechanical parameters mechanical parameters characteristics creepage distances clearance distances internal isolation thickness 7.62-mm pitch TLP240Ga 7.0 (min) 7.0 (min) 0.4 (min) 10.16-mm pitch TLP240Gaf 8.0 (min) 8.0 (min) 0.4 (min) unit mm
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 2 5. 5. 5. 5. packaging (note) packaging (note) packaging (note) packaging (note) TLP240G TLP240G(lf1,tp1) TLP240G(lf5,tp5) TLP240Gf TLP240Gf(lf4,tp4) note: through hole type: TLP240Ga, TLP240Gaf lead forming option: (lf1), (lf4), (lf5) taping option: (tp1), (tp4), (tp5) 6. 6. 6. 6. pin assignment pin assignment pin assignment pin assignment 1: anode 2: cathode 3: drain 4: drain 7. 7. 7. 7. internal circuit internal circuit internal circuit internal circuit 11-5b2s 11-5b201s 11-5b205s 11-5b202s 11-5b204s
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 3 8. 8. 8. 8. absolute maximum ratings (note) (unless otherwise specified, t absolute maximum ratings (note) (unless otherwise specified, t absolute maximum ratings (note) (unless otherwise specified, t absolute maximum ratings (note) (unless otherwise specified, t a a a a = 25 = 25 = 25 = 25 ) ) ) ) led detector common characteristics input forward current input forward current derating input forward current (pulsed) input reverse voltage input power dissipation junction temperature off-state output terminal voltage on-state current on-state current derating on-state current (pulsed) output power dissipation junction temperature storage temperature operating temperature lead soldering temperature isolation voltage (t a 25 ) (100 s pulse, 100 pps) (t a 25 ) (t = 100 ms, duty = 1/10) (10 s) ac, 60 s, r.h. 60 % symbol i f ? i f / ? t a i fp v r p d t j v off i on ? i on / ? t a i onp p o t j t stg t opr t sol bv s note (note 1) rating 30 -0.3 1 5 50 125 350 100 -1.0 300 500 125 -55 to 125 -40 to 85 260 5000 unit ma ma/ a v mw v ma ma/ ma mw vrms note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook ("handling precautions"/"derating concept and methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: this device is considered as a two-terminal device: pins 1 and 2 are shorted together, and pins 3 and 4 are shorted together. 9. 9. 9. 9. recommended operating conditions (note) recommended operating conditions (note) recommended operating conditions (note) recommended operating conditions (note) characteristics supply voltage input forward current on-state current operating temperature symbol v dd i f i on t opr note min 5 -20 typ. 7.5 max 280 25 100 65 unit v ma ma note: the recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. each parameter is an independent value. when creating a system design using this device, the electrical characteristics specified in this datasheet should also be considered.
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 4 10. 10. 10. 10. electrical characteristics (unless otherwise specified, t electrical characteristics (unless otherwise specified, t electrical characteristics (unless otherwise specified, t electrical characteristics (unless otherwise specified, t a a a a = 25 = 25 = 25 = 25 ) ) ) ) led detector characteristics input forward voltage input reverse current input capacitance off-state current output capacitance symbol v f i r c t i off c off note test condition i f = 10 ma v r = 5 v v = 0 v, f = 1 mhz v off = 350 v v = 0 v, f = 1 mhz min 1.1 typ. 1.27 50 30 max 1.4 10 1000 unit v a pf na pf 11. 11. 11. 11. coupled electrical characteristics (unless otherwise specified, t coupled electrical characteristics (unless otherwise specified, t coupled electrical characteristics (unless otherwise specified, t coupled electrical characteristics (unless otherwise specified, t a a a a = 25 = 25 = 25 = 25 ) ) ) ) characteristics trigger led current return led current on-state resistance symbol i ft i fc r on note (note 1) test condition i on = 100 ma i off = 10 a i on = 100 ma, i f = 5 ma, t < 1 s i on = 100 ma, i f = 5 ma, continuous min 0.1 typ. 0.6 25 35 max 3 35 50 unit ma ? note 1: thermally saturated state. 12. 12. 12. 12. isolation characteristics (unless otherwise specified, t isolation characteristics (unless otherwise specified, t isolation characteristics (unless otherwise specified, t isolation characteristics (unless otherwise specified, t a a a a = 25 = 25 = 25 = 25 ) ) ) ) characteristics total capacitance (input to output) isolation resistance isolation voltage symbol c s r s bv s note (note 1) (note 1) (note 1) test condition v s = 0 v, f = 1 mhz v s = 500 v, r.h. 60 % ac, 60 s ac, 1 s in oil dc, 60 s in oil min 1 10 12 5000 typ. 0.8 10 14 10000 10000 max unit pf ? vrms vdc note 1: this device is considered as a two-terminal device: pins 1 and 2 are shorted together, and pins 3 and 4 are shorted together. 13. 13. 13. 13. switching characteristics (unless otherwise specified, t switching characteristics (unless otherwise specified, t switching characteristics (unless otherwise specified, t switching characteristics (unless otherwise specified, t a a a a = 25 = 25 = 25 = 25 ) ) ) ) characteristics turn-on time turn-off time symbol t on t off note test condition see fig. 13.1. r l = 200 ? , v dd = 20 v, i f = 5 ma min typ. 0.3 0.1 max 2 1 unit ms fig. fig. fig. fig. 13.1 13.1 13.1 13.1 switching time test circuit switching time test circuit switching time test circuit switching time test circuit
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 5 14. 14. 14. 14. characteristics curves (note) characteristics curves (note) characteristics curves (note) characteristics curves (note) fig. fig. fig. fig. 14.1 14.1 14.1 14.1 i i i i f f f f - t - t - t - t a a a a fig. fig. fig. fig. 14.2 14.2 14.2 14.2 i i i i on on on on - t - t - t - t a a a a fig. fig. fig. fig. 14.3 14.3 14.3 14.3 i i i i f f f f - v - v - v - v f f f f fig. fig. fig. fig. 14.4 14.4 14.4 14.4 i i i i on on on on - v - v - v - v on on on on fig. fig. fig. fig. 14.5 14.5 14.5 14.5 r r r r on on on on - t - t - t - t a a a a fig. fig. fig. fig. 14.6 14.6 14.6 14.6 i i i i ft ft ft ft - t - t - t - t a a a a
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 6 fig. fig. fig. fig. 14.7 14.7 14.7 14.7 t t t t on on on on , t , t , t , t off off off off - i - i - i - i f f f f fig. fig. fig. fig. 14.8 14.8 14.8 14.8 t t t t on on on on , t , t , t , t off off off off - t - t - t - t a a a a fig. fig. fig. fig. 14.9 14.9 14.9 14.9 i i i i off off off off - t - t - t - t a a a a note: the above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted.
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 7 15. 15. 15. 15. soldering and storage soldering and storage soldering and storage soldering and storage 15.1. 15.1. 15.1. 15.1. precautions for soldering precautions for soldering precautions for soldering precautions for soldering the soldering temperature should be controlled as closely as possible to the conditions shown below, irrespective of whether a soldering iron or a reflow soldering method is used. ? when using soldering reflow. the soldering temperature profile is based on the package surface temperature. (see the figure shown below, which is based on the package surface temperature.) reflow soldering must be performed once or twice. the mounting should be completed with the interval from the first to the last mountings being 2 weeks. fig. fig. fig. fig. 15.1.1 15.1.1 15.1.1 15.1.1 an example of a temperature profile when lead(pb)-free solder is used an example of a temperature profile when lead(pb)-free solder is used an example of a temperature profile when lead(pb)-free solder is used an example of a temperature profile when lead(pb)-free solder is used ? when using soldering flow preheat the device at a temperature of 150 (package surface temperature) for 60 to 120 seconds. mounting condition of 260 within 10 seconds is recommended. flow soldering must be performed once. ? when using soldering iron complete soldering within 10 seconds for lead temperature not exceeding 260 or within 3 seconds not exceeding 350 heating by soldering iron must be done only once per lead. 15.2. 15.2. 15.2. 15.2. precautions for general storage precautions for general storage precautions for general storage precautions for general storage ? avoid storage locations where devices may be exposed to moisture or direct sunlight. ? follow the precautions printed on the packing label of the device for transportation and storage. ? keep the storage location temperature and humidity within a range of 5 to 35 and 45 % to 75 %, respectively. ? do not store the products in locations with poisonous gases (especially corrosive gases) or in dusty conditions. ? store the products in locations with minimal temperature fluctuations. rapid temperature changes during storage can cause condensation, resulting in lead oxidation or corrosion, which will deteriorate the solderability of the leads. ? when restoring devices after removal from their packing, use anti-static containers. ? do not allow loads to be applied directly to devices while they are in storage. ? if devices have been stored for more than two years under normal storage conditions, it is recommended that you check the leads for ease of soldering prior to use.
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 8 16. 16. 16. 16. land pattern dimensions (for reference only) land pattern dimensions (for reference only) land pattern dimensions (for reference only) land pattern dimensions (for reference only) unit: mm TLP240G fig. fig. fig. fig. 16.1 16.1 16.1 16.1 lead forming and taping option lead forming and taping option lead forming and taping option lead forming and taping option (lf1), (tp1), (lf5), (tp5) TLP240Gf fig. fig. fig. fig. 16.2 16.2 16.2 16.2 lead forming and taping option lead forming and taping option lead forming and taping option lead forming and taping option (lf4), (tp4) 17. 17. 17. 17. marking (note) marking (note) marking (note) marking (note) TLP240G TLP240Gf note: a different marking is used for photocouplers that have been qualified according to option (d4) of en60747. see fig.18.3 and fig.18.4.
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 9 18. 18. 18. 18. en60747-5-5 option (d4) specification en60747-5-5 option (d4) specification en60747-5-5 option (d4) specification en60747-5-5 option (d4) specification ? part number: TLP240G (note) (note) (note) (note) ? the following part naming conventions are used for the devices that have been qualified according to option (d4) of en60747. example: TLP240G(d4-tp1,f(o d4: en60747 option tp1: tape type f: [[g]]/rohs compatible (note 1) (note 1) (note 1) (note 1) o: domestic id (country/region of origin: japan) note: use toshiba standard type number for safety standard application. e.g., TLP240G(d4-tp1,f(o TLP240G note 1: please contact your toshiba sales representative for details on environmental information such as the product's rohs compatibility. rohs is the directive 2011/65/eu of the european parliament and of the council of 8 june 2011 on the restriction of the use of certain hazardous substances in electrical and electronics equipment. fig. fig. fig. fig. 18.1 18.1 18.1 18.1 en60747 insulation characteristics en60747 insulation characteristics en60747 insulation characteristics en60747 insulation characteristics
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 10 table table table table 18.1 18.1 18.1 18.1 insulation related specifications (note) insulation related specifications (note) insulation related specifications (note) insulation related specifications (note) insulation related parameters minimum creepage distance minimum clearance minimum insulation thickness comparative tracking index symbol cr cl ti cti TLP240G 7.0 mm 7.0 mm 0.4 mm 175 TLP240Gf 8.0 mm 8.0 mm 0.4 mm 175 note: if a printed circuit is incorporated, the creepage distance and clearance may be reduced below this value. (e.g., at a standard distance between soldering eye centers of 7.5 mm). if this is not permissible, the user shall take suitable measures. note: this photocoupler is suitable for safe electrical isolation safe electrical isolation safe electrical isolation safe electrical isolation only within the safety limit data. maintenance of the safety data shall be ensured by means of protective circuits. fig. fig. fig. fig. 18.2 18.2 18.2 18.2 marking on packing for en60747 marking on packing for en60747 marking on packing for en60747 marking on packing for en60747 TLP240G fig. fig. fig. fig. 18.3 18.3 18.3 18.3 marking example (note) marking example (note) marking example (note) marking example (note) TLP240Gf fig. fig. fig. fig. 18.4 18.4 18.4 18.4 marking example (note) marking example (note) marking example (note) marking example (note) note: the above marking is applied to the photocouplers that have been qualified according to option (d4) of en60747.
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 11 fig. fig. fig. fig. 18.5 18.5 18.5 18.5 measurement procedure measurement procedure measurement procedure measurement procedure
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 12 package dimensions package dimensions package dimensions package dimensions unit: mm TLP240G weight: 0.26 g (typ.) package name(s) toshiba: 11-5b2s
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 13 package dimensions package dimensions package dimensions package dimensions unit: mm TLP240G(lf1,tp1) weight: 0.25 g (typ.) package name(s) toshiba: 11-5b201s
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 14 package dimensions package dimensions package dimensions package dimensions unit: mm TLP240G(lf5,tp5) weight: 0.25 g (typ.) package name(s) toshiba: 11-5b205s
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 15 package dimensions package dimensions package dimensions package dimensions unit: mm TLP240Gf weight: 0.26 g (typ.) package name(s) toshiba: 11-5b202s
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 16 package dimensions package dimensions package dimensions package dimensions unit: mm TLP240Gf(lf4,tp4) weight: 0.25 g (typ.) package name(s) toshiba: 11-5b204s
2015-09-10 rev.3.0 ?2015 toshiba corporation TLP240G,TLP240Gf 17 restrictions on product use restrictions on product use restrictions on product use restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collectively "toshiba"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "product") without notice. ? this document and any information herein may not be reproduced without prior written permission from toshiba. even with toshiba's written permission, reproduction is permissible only if reproduction is without alteration/omission. ? though toshiba works continually to improve product's quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and application notes for product and the precautions and conditions set forth in the "toshiba semiconductor reliability handbook" and (b) the instructions for the application with which the product will be used with or for. customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers' product design or applications. toshiba assumes no liability for customers' product design or applications. toshiba assumes no liability for customers' product design or applications. toshiba assumes no liability for customers' product design or applications. ? product is neither intended nor warranted for use in equipments or systems that require product is neither intended nor warranted for use in equipments or systems that require product is neither intended nor warranted for use in equipments or systems that require product is neither intended nor warranted for use in equipments or systems that require extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage and/or serious public impact cause loss of human life, bodily injury, serious property damage and/or serious public impact cause loss of human life, bodily injury, serious property damage and/or serious public impact cause loss of human life, bodily injury, serious property damage and/or serious public impact ("unintended use"). ("unintended use"). ("unintended use"). ("unintended use"). except for specific applications as expressly stated in this document, unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. if you use product for if you use product for if you use product for if you use product for unintended use, toshiba assumes no liability for product. unintended use, toshiba assumes no liability for product. unintended use, toshiba assumes no liability for product. unintended use, toshiba assumes no liability for product. for details, please contact your toshiba sales representative. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is presented only as guidance for product use. no responsibility is assumed by toshiba for any infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provided in the relevant terms and conditions of sale absent a written signed agreement, except as provided in the relevant terms and conditions of sale absent a written signed agreement, except as provided in the relevant terms and conditions of sale absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including including without limitation, indirect, consequential, special, or incidental damages or loss, including including without limitation, indirect, consequential, special, or incidental damages or loss, including including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular or information, including warranties or conditions of merchantability, fitness for a particular or information, including warranties or conditions of merchantability, fitness for a particular or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. purpose, accuracy of information, or noninfringement. purpose, accuracy of information, or noninfringement. purpose, accuracy of information, or noninfringement. ? gaas (gallium arsenide) is used in product. gaas is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose gaas in product. ? do not use or otherwise make available product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the japanese foreign exchange and foreign trade law and the u.s. export administration regulations. export and re-export of product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of product. please use product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring toshiba assumes no liability for damages or losses occurring toshiba assumes no liability for damages or losses occurring toshiba assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. as a result of noncompliance with applicable laws and regulations. as a result of noncompliance with applicable laws and regulations. as a result of noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TLP240G

	To Download TLP240G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .